Chapter members in search of or have items for sale, or need to post a service, may place a free (non-commercial) add in this column. Call the Editor: Kris Niswonger@ 608-347-9949 or send it via email to: kris123@tds.net

Caveat Emptor...buyers beware!”

Wanted HANGER SPACE. Chapter member needs hanger space for final assembly of Zenith Zodiac CH 601 XL. Contact Bill Bartlett by e-mail at BDBartlett@aol.com or telephone (210) 403-0248 (days) or (210) 494-7194 (evenings) or cellular (210) 865-4591

For Sale After realignment of my priorities (building a new home) I will sell
my Sonex project for best offer. This is Sonex #300, which was in an accident
and needs to be restored. The engine has been completely restored with exception
of prop hub. It is a VW Type IV 2600 cc w/brand new SCAT crank
eliminating the prop hub problems of the Type IV engine.

The airframe has an excess of $4,000.00 in usable parts. The engine
has an excess of $6,000.00 of new parts including dual electronic
ignition w/dual plug completely overhauled heads.
It would take approx. $6,000.00 to finish the airframe which has
approx. 60% damage.The advantage of this project is that you have a template to work
with and most of the small manufactured parts (which are the most
time consuming) are reusable. It would take a lot less than the
total of approx. $25,000.00 (including avionics) to complete this
project, not to mention the time gained in construction.
All parts needed are readily available from Sonex, or if you want to
scratch build, from local vendors.

I will also sell all aircraft specific tools and the new owner can assume the lease of my hangar half at San Geronimo Airfield.
If interested please give me a call at: (210) 680-2757

Joerg P. Thees
San Antonio, TX

Wanted: Need used, low-cost altimeter, airspeed indicator, and compass for our Breezy. Norris Warner 830.510.4334.

For Sale - QUICKSILVER MX Hirth 2702 40 hp (62 hours TT) POWER-FIN Propeller--3 Bladed (new) $7,200 Contact Norris Warner at 830.510.4334

For Sale: Cozy IV plans #0944 with 2 years of news letters. $400.00 buyer to pay any transfer fees. I will pay all postage. Please contact John Mayfield, 210-946-8748, or cell 382-2612.

Instructor Available. Chapter member Bob Cabe has recertified his CFI & CFII. Available to EAAers for BFR’s. (210) 493-7223.

Instructor Available. Chapter member Bob Browne CFII SE ME INST Rotorcraft. Will provide free flight review for Chapter 35 members. (830) 612-2371.

For Sale: Evans VP-1 Volksplane project. Contact Danny McCormick for details: 210-872.3959 or 599.2679.

For Sale: RV-4, 180hp O-360A1A, Hartzell constant speed prop, KX155, encoding transponder, GPSMAP 195, wing leveler. Lots of fun, and good cross country too. Located SAT. $49,500.00 Bob Fodge (210) 822-5725

For Sale: 2 encoders -brand new- never used- still in boxes. model 120-15 Transcal - 14 to 28 volts- solid state -$100.00 each please cal Mel @ 210-651-5086.

For Sale: Three (3) BIG Plugs of roofing tar. Have melted together so it’s heavy. FREE! Contact Al Almond 210/674-1597

For Sale: House and hangar @ San Geronimo (8T8). To view the property contact Dan Cerna@ 210.688.9345 or Dave Baker@ 210-688-3358.

For Rent: Shop Space. Danny McCormick has approx. 2,000 sq.ft. of shop space for 4-5 folks who need a place to build their planes. Bldg is located near the main post office. 210-872-3959 or 599-2679.

Wanted: I am looking for the lower cowl for a Cessna 120/140.
Jim McIrvincell/voice mail 210-275-7780
email: mcirvinj@swbell.net or pilot195@rocketmail.com

For Sale: RV-4, 180hp 0-360A1A, Hartzell constant speed prop, KX155, encoding transponder, GPSMAP 195, wing leveler. Lots of fun, and good cross country too.
Located SAT. $49,500.00 (210) 822-5725 Bob Fodge